Switches

The Cisco 7600 SIP-400 helps enable high-performance, intelligent wide- and metropolitan-area network (WAN/MAN) services. Enterprises and service providers can take full advantage of the increased scalability, performance and rich features offered by the Cisco 7600 SIP-400 along with the many options for WAN aggregation and connectivity offered in the SPA/SIP portfolio. The Cisco 7600 SIP-400 accepts up to four Cisco SPAs including ATM, packet over SONET/SDH (POS), Ethernet and Circuit Emulation over Packet (CEoP), BITS Clocking support and WAN/MAN connectivity. Learn More

CISCO GLC-T Cisco GLC T SFP transceiver is a hot pluggable module use RJ45 interface, it is compatible to use with 1000Base-T applications, we supply the Cisco GLC T SFP equivalent transceivers, they are 100% compatible with Cisco equipment and stable performance. Learn More

CISCO SFP-10G-LR Cisco SFP 10G LR is a SFP+ transceiver works with 1310nm single mode fiber for max 10km, we supply the SFP 10 LR Cisco equivalent transceivers. This 1310 nm DFB 10Gigabit SFP 10G LR SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km. Learn More

CISCO SFP-10G-SR Cisco SFP 10G SR is a 850nm multimode SFP+ transceiver, it works with 50MMF and 62.5MMF with max 300meters working span, we supply the SFP 10 SR Cisco equivalent transceivers, this SFP plus transceiver is 100% Cisco compatible, with low cost and fast delivery. Learn More

CISCO VS-S720-10G-3C The Cisco® Catalyst® 6500/Cisco 7600 Series Supervisor Engine 720 is a family of Supervisor Engine(s) designed to deliver scalable performance and rich set of IP features in hardware. Its hardware-based feature set enables applications such as traditional IP forwarding, Layer 2 and Layer 3 Multiprotocol Label Switching (MPLS) VPNs, Ethernet over MPLS (EoMPLS) with quality of service (QoS) and security features. The Supervisor engine 720 integrates a high-performance 720 Gbps crossbar switch fabric with a forwarding engine in a single module, delivering 40 Gbps of switching capacity per slot (enabling 4-port 10GE and 48-port 10/100/1000 density line cards). With hardware-enabled forwarding for IPv4, IPv6 and MPLS, the system performance is capable of 400 Mpps for IPv4, 200 Mpps for IPv6 traffic, with features and 1024 VRFs each populated with up to 700 routes/VRF for MPLS. Learn More

CISCO WS-C2950G-24-EI The Cisco Catalyst® 2950 Series Intelligent Ethernet switches is an affordable line of fixed-configuration Fast Ethernet and Gigabit Ethernet switches that extend intelligence to the metro access edge, enabling service breadth, availability, security, and manageability. Key components of the Cisco Metro Ethernet Switching portfolio, these switches are ideal for service providers looking to deliver profitable Ethernet services to the residential and small-office, home-office (SOHO) market. Featuring advanced rate limiting, voice virtual LAN (VLAN) support, and multicast management, these switches enable a variety of residential metro services such as Internet access, voice over IP (VoIP), and broadcast video. The Cisco Catalyst 2950 Series Intelligent Ethernet switches consists of the following devices—which are only available with the Enhanced Image (EI) software for the Cisco Catalyst 2950 Series: Learn More

CISCO WS-C2950T-24 The Cisco® Catalyst® 2950SX48, 2950T-48, 2950SX-24, 2950-24, and 2950-12 switches, members of the Cisco Catalyst 2950 Series, are standalone, fixed-configuration, managed 10/100 Mbps switches providing basic workgroup connectivity for small to midsize networks. These wire-speed desktop switches come with Standard Image software features and offer Cisco IOS® Software functions for basic data, voice, and video services at the edge of the network. Embedded in all Cisco Catalyst 2950 Series switches is the Cisco Device Manager software, which allows users to easily configure and monitor the switch using a standard Web browser, eliminating the need for more complex terminal emulation programs and knowledge of the command-line interface (CLI). Learn More

CISCO WS-C2960-24TT-L The Cisco® Catalyst® 2960-S and 2960 Series Switches are the leading Layer 2 edge, providing improved ease of use, highly secure business operations, improved sustainability, and a borderless network experience. The Catalyst 2960-S Series Switches include new FlexStack switch stacking capability with 1 and 10 Gigabit connectivity, and Power over Ethernet Plus (PoE+) with the Cisco Catalyst 2960 Series Switches offering Fast Ethernet access connectivity and PoE capabilities. The Cisco Catalyst 2960-S and 2960 Series are fixed-configuration access switches designed for enterprise, midmarket, and branch office networks to provide lower total cost of ownership. Learn More

CISCO WS-C2960-48TT-L The Cisco® Catalyst® 2960-S and 2960 Series Switches are the leading Layer 2 edge, providing improved ease of use, highly secure business operations, improved sustainability, and a borderless network experience. The Catalyst 2960-S Series Switches include new FlexStack switch stacking capability with 1 and 10 Gigabit connectivity, and Power over Ethernet Plus (PoE+) with the Cisco Catalyst 2960 Series Switches offering Fast Ethernet access connectivity and PoE capabilities. The Cisco Catalyst 2960-S and 2960 Series are fixed-configuration access switches designed for enterprise, midmarket, and branch office networks to provide lower total cost of ownership. Learn More